Exploration Target at Golden Crown Focus on Resource Growth
Released
Released
Announcement PDF
ASX Announcement
ASX:WIN
27 May 2025
Exploration Target at Golden Crown to Focus
on Resource Growth
Highlights
•
WIN has defined an Exploration Target for Golden Crown of 400kt to 700kt tonnes
between 2.4g/t to 3.2g/t Au for 23,000oz to 73,000oz of gold. This is in addition to the
current Inferred Mineral Resource Estimate (MRE) of 400kt @ 3.1g/t Au for 38,000oz of
gold 1
•
The Exploration Target is supported by the successful 2024 drilling campaign, which
tested mineralisation below current Inferred Resource at Golden Crown including 2:
•
24BCRC014 - 6m @ 10.85g/t Au (140m below MRE)
•
24BCRC012 - 5m @ 3.63g/t Au (95m below MRE)
•
WIN remains focused on growing shareholder value through low-cost, high-impact
drilling at the high-grade Golden Crown, complementing the recently announced 2025
Butchers Creek MRE update of 5.23Mt at 1.91g/t Au for 321,000oz of gold
•
Heritage clearance results for the 2025 field program have now been received with no
impediments to proposed drilling activities
•
Preparation work is underway to support a 9,000m drilling program, with drilling
scheduled to commence in July 2025
The potential quantity and grade of the Exploration Target is conceptual in nature and, as such,
there has been insufficient exploration drilling conducted to estimate a Mineral Resource. At
this stage it is uncertain if further exploration drilling will result in the estimation of a Mineral
Resource. The Exploration Target has been prepared in accordance with the JORC Code
(2012). This exploration target is exclusive of the 2021 Golden Crown Mineral resource
estimate of 400kt at 3.10g/t Au for 38,000oz of gold.
WIN Metals Ltd (ASX: WIN) (“WIN” or “the Company”) is pleased to announce an Exploration
Target for the high-grade Golden Crown gold deposit, part of the Company’s Butchers Creek
1
2
ASX:WIN “WIN advances Butchers Creek towards development following resource update” released 16 April 2025
ASX:WIN “Golden Crown North Delivers High Grades and Growth Potential” released 25 November 2024
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
1
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
Gold Project (“BCGP”) located in the East Kimberley region of Western Australia. The BCGP
currently contains a global Mineral Resource of 5.63Mt @ 1.98g/t Au for 359,000oz of gold.
The Golden Crown Exploration Target, which lies below the current Inferred Resource, is estimated
at between 400kt to 700kt @ 2.4g/t to 3.2g/t Au, representing an additional 23,000oz to 73,000oz
of gold beyond the current MRE.
WIN Metals Managing Director and CEO, Mr Steve Norregaard, commented:
“The establishment of an Exploration Target at the high-grade Golden Crown gold deposit
following our highly successful 4-hole drilling program late in 2024 marks another important
milestone in WIN’s strategy to unlock value from the project. The potential for additional gold at
Golden Crown represents a compelling resource growth opportunity that could see Golden
Crown be a meaningful satellite producer complementing the main Butchers Creek body of
mineralisation.
With a very targeted, low-cost exploration approach this supports our vision of becoming the next
gold producer in Kimberley region of WA. The upcoming 9,000m drill campaign is designed to test
the potential and deliver further value to shareholders through disciplined, high-impact
exploration. We’re suitably enthused by what lies ahead.”
Exploration Target Basis
During WIN’s 2024 drilling campaign, 4 holes for 873m were drilled at Golden Crown
demonstrating the resource growth potential. In aggregate, 159 holes for 12,570m have been
drilled at Golden Crown along the lightly tested 2km strike.
Highlights from WIN’s drilling included:
•
6m @ 10.85g/t Au from 253m in hole 24BCRC014 (140m below the Mineral Resource)
•
5m @ 3.63g/t Au from 222m in hole 24BCRC012 (95m below Mineral Resource)
•
2m @ 6.00g/t Au from 130m in hole 24BCRC013 (25m below Mineral Resource)
The Golden Crown Exploration Target was generated using the following parameters:
•
Mineralised envelopes have been remodelled at Golden Crown using Micromine
software, with the new intercepts included at Golden Crown North from all holes drilled
at the deposit
•
A 0.3g/t Au cut-off was applied to constrain the mineralisation envelopes
•
Mineralisation envelopes have been extended up to 250m below surface (130m RL) and
extended a maximum of 60m radii along strike from a mineralised intercept
•
Volume of the mineralisation envelopes were converted to tonnage using a factor of 2.71t
per cubic meter, consistent with the April 2025 MRE update for Butchers Creek
•
Upper and lower grade ranges were calculated at ±15% of the current MRE for Golden
Crown of 3.10g/t Au. The southern extension mineralisation envelope, which was not
modelled nor reported in 2021 MRE, has been assigned the average composite grade
•
Upper and lower tonnage ranges were calculated at ±15% of the updated mineralisation
envelopes
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
2
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
•
The Exploration Target output range was rounded to the nearest 1,000oz to reflect the
conceptual nature of this calculation
Figure 1: Golden Crown Exploration Target mineralisation envelopes (red fill) with 2021 MRE block model
(grey) and drillhole traces (black) looking north-west. Dashed red line represents 500m of strike between
Golden Crown South and North images for illustration purposes only.
Heritage Clearance for 2025 Drilling Programme
All drilling proposed in the 2025 heritage survey has been approved by the Koongie Elvire
Traditional Owners Group following the completion of a heritage survey in April. This approval
enables WIN to accelerate its 2025 drilling programme, focusing on growing the Golden Crown
resource and testing the EIS co-funded exploration target, Ganymede 3.
Future Work
The 2025 field season has commenced with reconnaissance work underway, now both heritage
survey and the necessary clearances have been received. The drilling program will primarily
focus on resource growth at the Golden Crown gold deposit, with 9,000m of drilling planned to
commence in June/July 2025. An updated MRE for Golden Crown is expected later in 2025.
Location and Project History
The Golden Crown gold deposit is within exploration licence E80/4976, which is 4.5km north of
the Butchers Creek gold mine and 30km southeast of Halls Creek in the Kimberley region of
Western Australia. The project is accessible via the Duncan Road that connects the BCGP to the
town of Halls Creek and the Great Northern Highway.
3
ASX:WIN “Award of Exploration Incentive Scheme (EIS) Co-funding” released 1 May 2025
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
3
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
Figure 2: Location of Butchers Creek Gold Project
Gold production from the Butchers Creek open pit commenced in 1995 with the construction of
a 500ktpa conventional carbon in pulp processing plant, a 9Mt tails storage facility, diesel power
station and a 75-person accommodation camp and offices (Figure 3). Total recorded production
from the Butchers Creek open pit was 761,000t @2.09g/t Au for 52,000oz of gold produced until
the operation was closed in late 1997 due to the low prevailing gold price. The Butchers Creek
500ktpa processing plant has since been decommissioned and mine site rehabilitated.
Post closure of the mining operation, various public and private entities held the tenure with
exploration drilling in the ensuing period mostly carried out by Northern Star Resources in 2004
at Golden Crown and Meteoric Resources (MEI) between 2020 and 2022 at Butchers Creek. WIN
acquired the project in late 2024 and completed maiden drilling campaign at the Golden Crown
and Butchers Creek deposits facilitating the 2025 Butchers Creek MRE update.
Figure 3: Butchers Creek gold processing plant. Circa 1996.
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
4
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
Figure 4: Butchers Creek open pit May 2024
Figure 5: Golden Crown South historic open stope
Competent Person Statement – Exploration and Mineral Resource Results
The information in this announcement that relates to exploration results and Exploration Targets
is based on information reviewed, collated and fairly represented by Mr William Stewart, who is
a full-time employee of WIN Metals Ltd. Mr Stewart is a member of the Australasian Institute of
Metallurgy and Mining (member no 224335) and Australian Institute of Geoscientists (member
no 4982). Mr Stewart has sufficient experience that is relevant to the style of mineralisation and
type of deposit under consideration and to the activity being undertaken to qualify as a
Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves’. Mr Stewart consents to the inclusion
in the report of the matters based on his information in the form and context in which it appears.
Additionally, Mr Stewart confirms that the entity is not aware of any new information or data that
materially affects the information contained in the ASX releases referred to in this report.
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
5
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
Compliance Statement
The Company confirms it is not aware of any new information or data that materially affects the
information included in the original market announcement(s), and in the case of estimates of
Mineral Resources that all material assumptions and technical parameters underpinning the
estimates in the relevant announcement continue to apply and have not materially changed. The
Company confirms that the form and context in which the Competent Person’s findings are
presented have not been materially modified from the original announcement.
Forward Looking Statements
This announcement includes forward-looking statements that are only predictions and are
subject to known and unknown risks, uncertainties, assumptions and other important factors,
many of which are beyond the control of WIN Metals Ltd, the directors and the Company’s
management. Such forward-looking statements are not guarantees of future performance.
Examples of forward-looking statements used in this announcement include use of the words
‘may’, ‘could’, ‘believes’, ’estimates’, ‘targets’, ’expects’, or ‘intend’ and other similar words that
involve risks and uncertainties. These statements are based on an assessment of present
economic and operating conditions, and on a number of assumptions regarding future events
and actions that, as at the date of announcement, are expected to take place.
Actual values, results, interpretations or events may be materially different to those expressed
or implied in this announcement. Given these uncertainties, recipients are cautioned not to
place reliance on forward-looking statements in the announcement as they speak only at the
date of issue of this announcement. Subject to any continuing obligations under applicable law
and the ASX Listing Rules, WIN Metals Ltd does not undertake any obligation to update or revise
any information or any of the forward-looking statements in this announcement or any changes
in events, conditions or circumstances on which any such forward-looking statement is based.
Summary Information
This announcement has been prepared by WIN Metals Limited (WIN) and includes information
regarding WIN’s disclosure of results to the ASX.
This announcement should also be read in conjunction with WIN’s other periodic and continuous
disclosure announcements lodged with the ASX, which are available at www.asx.com.au and
also available on WIN’s website at www.winmetals.com.au.
Table 1: Reference documents included in this announcement
Number
1
2
3
3
4
5
Announcement
Date
16-Apr-25
25-Nov-24
1-May-25
23-Jul-24
8-Nov-23
4-Aug-23
Company
Announcement Title
WIN
WIN
WIN
WIN advances Butchers Creek towards development following resource update
Golden Crown North Delivers High Grades and Growth Potential
Award of Exploration Incentive Scheme (EIS) Co-funding
WIN
Munda Agreement with Auric Mining Ltd yields $1.2m+ for WIN (Updated)
WIN
375% Growth in Faraday-Trainline Lithium Mineral Resource
WIN
Faraday Mining Proposal Approved
Approved for release by: The Board of Directors
-ENDS-
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
6
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
For further details please contact:
Steve Norregaard
Managing Director
WIN Metals Ltd
steve@winmetals.com.au
0472 621 529
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
7
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
About WIN Metals
WIN Metals (ASX: WIN) is a mineral exploration company holding 340km2 of granted tenure in the
Southern Goldfields and Kimberley regions of Western Australia. Gold, Nickel and Lithium
resources exist within the Company’s tenure.
The Butchers Creek Gold Project is located 30km south-east of Halls Creek in the Kimberley
region of Western Australia. Butchers Creek is a historic gold production centre hosting a global
mineral resource of 5.63Mt @ 1.98/t Au for 359,000oz of gold and a series of advanced drill
targets highly prospective for gold. Previous production from the Butchers Creek gold mine
resulted in 52,000oz of gold being produced between 1995 and 1997.
The Mt Edwards Nickel and Faraday-Trainline Lithium Projects are located at Widgiemooltha
80km south of the major regional centre of Kalgoorlie-Boulder and 30km south-west of the town
of Kambalda. The Mt Edwards Nickel Project is a collection of twelve (12) separate nickel
sulphide deposits with a total mineral resource reported of 13Mt @ 1.45% Ni for 188,160t of
nickel 4.
The Faraday-Trainline Lithium Project is a shallow open pitable resource of 1.96 Mt @ 0.69% Li2O5
with an approved small mining proposal 6.
Table 2: WIN Metals Butchers Creek Gold Mineral Resource Estimates
Deposit
Last
Update
Butchers
Creek
Apr-25
Golden Crown
Jun-21
Total
Resource
Classification
Tonnes
(Mt)
Au
g/t
Contained Gold
(Oz)
Indicated
3.58
2.24
258,000
Inferred
1.65
1.18
63,000
Inferred
0.40
3.10
38,000
Indicated + Inferred
5.63
1.98
359,000
Note: Butchers Creek figures are rounded and reported at 0.5g/t Au cut-off to 150m below surface (open pit) and 0.8g/t
Au cut-off below 150m of surface. Golden Crown figures are rounded and reported above a 0.8g/t Au cut-off.
ASX:WIN announcement “Munda Agreement with Auric Mining Ltd yields $1.2m+ for WIN (Updated)” Released 23 July
2024
5
ASX:WIN announcement “375% Growth in Faraday-Trainline Lithium Mineral Resource” Released 8 November 2023
6
ASX:WIN announcement “Faraday Mining Proposal Approved” Released 4 August 2023
4
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
8
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
Table 3: WIN Metals Mt Edwards Nickel Mineral Resource Estimates
Indicated
Inferred
TOTAL Resources
Deposit
Tonne
(kt)
Nickel
(%)
Tonne
(kt)
Nickel
(%)
Tonne
(kt)
Nickel
(%)
Nickel
Tonnes
Gillett*
2,267
1.35
871
1.16
3,138
1.30
40,770
Widgie 3*
512
1.34
222
1.95
734
1.53
11,200
Widgie Townsite*
1,649
1.60
853
1.38
2,502
1.53
38,260
Armstrong*
949
1.45
10
1.04
959
1.44
13,820
132N
34
2.90
426
1.90
460
2.00
9,050
Munda
381
1.91
381
1.91
7,260
Cooke
154
1.30
154
1.30
2,000
Inco Boundary
464
1.20
464
1.20
5,590
McEwen
1,133
1.35
1,133
1.35
15,340
McEwen
Hangingwall
1,916
1.36
1,916
1.36
26,110
Mt Edwards 26N
871
1.43
871
1.43
12,400
Zabel
272
1.94
53
2.04
325
1.96
6,360
TOTAL
5,683
1.48
7,354
1.42
13,037
1.45
188,160
All Resources reported at 1.0% Ni cut-off except for WTS, Widgie 3, Gillett and Armstrong which are reported at 0.7%
Ni cut- off. Tonnes and grade have been rounded to reflect the relative uncertainty of the estimates.
Table 4: WIN Metals Mt Edwards Lithium Mineral Resource Estimates
Measured
Deposit
Indicated
Inferred
TOTAL Resources
Tonne (kt)
Li2O (%)
Tonne (kt)
Li2O (%)
Tonne (kt)
Li2O (%)
Tonne (kt)
Li2O (%)
Li2O Tonnes
Faraday
550
0.75
250
0.66
220
0.61
1,020
0.7
7,100
Trainline
-
-
780
0.69
160
0.63
940
0.68
6,300
TOTAL
550
0.75
1,020
0.68
390
0.62
1,960
0.69
13,500
Reported above a cut-off grade of 0.30% Li2O to a depth of 310mRL (65m below surface) and 0.50% Li2O below
310mRL to 250mRL. Tonnes and grade have been rounded to reflect the relative uncertainty of the estimates.
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
9
Exploration Target at Golden Crown to Focus on Resource Growth
27 May 2025
Figure 6 - WIN Metals Project Map
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
10
ASX:WIN
Annexure A : JORC Code 2012 Guidelines Table 1
Section 1 Sampling Techniques and Data
Criteria
Sampling techniques
Drilling Techniques
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
Commentary
Historic Drilling Pre 2020:
PERCUSSION (PERC) sampling was generally conducted on 1 meter and 2 metre samples down the drill holes. These holes were
only used for geological interpretation and not to inform the estimate.
REVERSE CIRCULATION (RC) drilling was used to obtain 1 m samples from which 3-5kg was split out, then sent to the laboratories
to be pulverised to produce a 50g charge for fire assay.
DIAMOND CORE (DD) drilling was used to obtain 1m samples from which 3-5kg was cut, then sent to the laboratories to be
pulverised to produce a 50 g charge for fire assay.
WIN Drilling 2024:
All new data collected from the Butchers Creek gold project discussed in this report relates to Reverse Circulation (RC) and diamond
drilling (DD) completed in 2024, unless stated otherwise.
RC samples have been by one metre sample intervals from the cone splitter mounted cyclone of the RC drill rig. Typically, 100%
recovered single metre samples returned weights of 2.5-3kg. No duplicate QAQC samples were taken at the rig with laboratory
duplicates preferred to test laboratory repeatability. The sample reject was placed by buckets in lines of 20 or 40 samples for
geological inspection, sample quality and recovery logging.
Samples assessed as prospective for gold mineralisation have been assayed at single metre sample intervals. The prospective
horizon is deemed by host rock (syenite), quartz and/or sulphide content. Areas outside the known mineralisation envelope (not
within the host syenite unit or quartz veining) the rig geologist has deemed to potentially host gold mineralisation was composite
sampled into 4 metre composites utilising industry standard process of scoop sampling the sample reject piles.
DD samples NQ2 and HQ3 size core have been acquired according to logged lithological and mineralisation boundaries at lengths
between 0.3 metres to 1.3 metres.
No other measurement tools related to sampling have been used in the holes for sampling other than directional/orientation survey
tools.
Samples have been freighted to Bureau Veritas Assay Laboratories in Canning Vale, Western Australia. On arrival at the laboratory
the samples were receipted, weighed and dried. Sample was then crushed and pulverised with a 40g charge used by fire assay and
then analysed by Atomic Absorption Spectrometry.
Historic Drilling Pre 2020:
RAB (BCRB*) drilling was used to test low priority areas east of the open cut.
PERCUSSION (BCP*) drilling used a 5.5’ hammer, a variety of rigs were used, including: Warman 1000 and Warman 750.
REVERSE CIRCULATION (BCRC) The majority of the RC drilling was carried out between 1993-1994 A 5” inch face sampling hammer
was used. A variety of rigs were utilised, including a Schramm 685 and Warman 1000.
DIAMOND (BCD*) drilling: produced mostly NQ diameter core in earlier exploration pre-1993, and mostly HQ diameter core
thereafter. Core was oriented by a Van Ruth ‘spear’.
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
11
Section 1 Sampling Techniques and Data
Criteria
Drill Sample Recovery
Logging
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
Commentary
WIN Drilling 2024:
RC drilling was carried out using a Schramm 685 truck mounted rig utilising an auxiliary Sullair 1150 compressor and Air Research
2610 booster. Drill rods are 6 metres long and drill bit diameter is 143mm. Holes have been drilled at angle of -60° to -80° with varying
azimuth angles to orthogonally intercept the interpreted favourable geological host unit.
The DD rig was a Boart Longyear KWL1600 truck mounted drill rig drilling NQ2 and HQ3 size core. Core was oriented using Axis Ori
Champ at 6m or 3m runs dependant on the competency of the core.
Historic Drilling Pre 2020:
BCD drilling, core loss was often recorded in the comments section of the summary logging sheets, as well as being recorded in a
specific column of detailed logging sheets. For PERC/RC drilling the comments section records where there was ‘wet sample’ or ‘no
sample’ return.
There is no documentation regarding maximizing recoveries. However, the use of suitable capacity drill rigs (mentioned above)
allows for best possible recoveries.
WIN Drilling 2024:
RC drilling was carried out using a Schramm 685 truck mounted rig utilising an auxiliary Sullair 1150 compressor and Air Research
2610 booster. Drill rods are 6 metres long and drill bit diameter is 143mm. Holes have been drilled at angle of -60° to -80° with varying
azimuth angles to orthogonally intercept the interpreted favourable geological host unit.
The DD rig was a Boart Longyear KWL1600 truck mounted drill rig drilling NQ2 and HQ3 size core. Core was oriented using Axis Ori
Champ at 6m or 3m runs dependant on the competency of the core.
Historic Drilling Pre 2020:
RC/PERC drill holes were geologically logged on a combination of 1 and 2 metre intervals.
Logging is qualitative in nature recording: oxidation, texture, rock type, structure type and alpha angles, alteration type and intensity,
sulphide type and percentages + mineralogy and percentage of veining.
RC and DD holes logged in full on site.
Metallurgical study by Normet Laboratories conducted in 1994.
Core photographed before stacking and shipping.
WIN Drilling 2024:
All RC drillholes have been geologically logged for lithology, weathering, alteration, and mineralogy. All samples have been logged
in the field at the time of drilling and sampling (both quantitatively and qualitatively where viable) with spoil material and sieved rock
chips assessed. All RC holes have been photographed.
Sporadic pXRF analysis has been used to validate logging with multielement but mainly Zn values used to determine the lithology.
All DD holes have been geologically logged (both quantitatively and qualitatively) for lithology, weathering, alteration and mineralogy
and sampled following drilling. All DD holes are photographed.
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
12
Section 1 Sampling Techniques and Data
Criteria
Sub-sampling
techniques and
sample preparation
Quality of assay data
and laboratory tests
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
Commentary
Historic Drilling Pre 2020:
DD samples: sections of half or quarter core were cut and sampled.
RC/PERC samples: earlier exploration where referenced used a jones splitter and took at least a 2kg sample for assay, while later
years used a multi-deck riffle splitter which took a 2-3kg sample.
Wet samples were obtained by spearing and sent for analysis. Later the remainder of the wet meters were dried and riffle split, of
which 2-3kg per meter was sent for assay.
Both sampling methods are considered appropriate for Au determination given the bulk sample size.
Standard Industry practices supports the above sampling protocols.
No information is provided around duplicate samples
Sample sizes conform with Industry Standards for Au detection in PREC/RC and DD drilling methods employed.
WIN Drilling 2024:
The sample preparation technique carried out in the field is considered industry best standard practice completed by the geologist
and field staff. Single metre samples were collected in a numbered calico bag each weighing 2.5kg-3.0kg from the RC rigs cone
splitter by the drillers offsider and placed above the corresponding sample reject pile. The geologist would nominate sampling zones
and then assign final sequenced pre-number calico bags to the sampling intervals. The numbered calico bag would be placed into
the final pre numbered calico bag ready in preparation for submission to the laboratory. QAQC standards and blanks were added to
the submission at this point. All numbered calico bags that have not been nominated for assay submission are retained on the drill
site or disposed of.
DD: Samples of NQ2 and HQ3 size core at lengths between 0.3 metres to 1.3 metres have been cut with an Almonte core saw and
half core submitted for analysis. With the remaining half core retained for future testwork.
Samples were dispatched from Halls Creek and freighted by road to Perth. Upon arrival at the laboratory the samples are receipted,
weighed then dried for 12 hours at 105oC before sample preparation commenced. Samples are then crushed by a Jaw Crusher to
sub 3mm then pulverised utilising a LM5 puck and bowl pulveriser for 3-5 minutes to achieve 90% 75um. A 150g split of pulverised
material was placed in a pulp packet in readiness for Fire Assay where 50g is used for Fire Assay and gold determination by Atomic
Absorption Spectrometry. The remainder of the pulverised sample was bagged and retained.
Sampling preparation outlined above is considered appropriate for gold determination and is considered standard industry
practices.
Historic Drilling Pre 2020:
Assaying was carried out at reputable, accredited Laboratories used extensively in Mining & Exploration industry at the time,
including: Australian Analytical Laboratories (Perth): Drying and total single stage milling before Au determination by Fire Assay (50g charge),
and Aqua Regia with an AAS finish.
PO BOX 7713
Cloisters Square WA 6850
T: +61 8 6381 7250
F: +61 8 6381 7299
info@winmetals.com.au
www.winmetals.com.au
ASX:WIN
13
Section 1 Sampling Techniques and Data
Criteria
Verification of
sampling and assaying
ABN 77 648 687 094
Level 4, 220 St Georges Tce
Perth, WA 6000
Commentary
Perth Assay Laboratories (Perth): Au determination by Fire Assay (50g charge).
Assay Corp Pty Ltd (Halls Creek, WA): Au determination by Fire Assay (50g charge).
PMA onsite laboratory (Halls Creek WA): Leachwell cyanide leach method assay + Standard every 30 samples
Genalysis Laboratory services (Perth WA): Check assays - Au determination by Aqua Regia. No additional methods or tools for
sampling are considered in the text. Quality Control Procedures are poorly documented.
WIN Drilling 2024:
WIN Metals has established QAQC procedures for all drilling and sampling programs including the use of commercial Certified
Reference Material (CRM) as field and laboratory standards, field and laboratory duplicates and blanks.
Gold CRM samples have been inserted into the batches by the geologist, at a nominal rate of 5% of the total samples.
Lab duplicates samples have been selected in mineralised zones, at a rate of 2% of total samples.
Samples of blank material have been submitted immediately after visibly mineralised zones at a nominal rate of 5% of the total
samples.
Sample size is considered appropriate to the grain size of the material being sampled.
Assaying was completed by Bureau Veritas in Canning Vale, Western Australia with standards and duplicates reported in the sample
batches.
The samples have been analysed by firing a 40g portion of the sample. Lower sample weights may be employed for samples with
very high sulphide and metal contents. This is the classical fire assay process and will give total separation of Gold in the sample.
Gold has been determined by Atomic Absorption Spectrometry.
Internal sample quality control analysis was then conducted on each sample and on the batch by the laboratory.
Results have been reported to WIN Metals in CSV, SIF and PDF formats.
A detailed QAQC ana
Share your feedback
Discover